|
|
|
|
Each is the product of more than two years development and review by
foundry industry experts, these handy reference guides are intended to provide product
design engineers and casting buyers with important insights as to how and why to use
nonferrous castings for their component needs. |
The NFFS Guide to Aluminum Casting Design:
A 320 page manual for aluminum foundries and their customers published
with assistance
from the Center for Applied Research in Metalcasting at The University of Northern Iowa,
this reference guide includes sections on casting design, alloy selection, geometric
dimensions and tolerances, material properties and specifications. |
|
Copper
Casting Alloys:
A joint publication of NFFS and the Copper Development Association, this
112 page publication covers alloy selection, specifications, physical and
mechanical properties of copper-base alloys, and casting design.
|
|
 Cast
Copper Alloy Sleeve Bearings:
A joint publication of NFFS and the Copper Development Association, this 72 page
handbook has been prepared for the use of engineers, designers and purchasing managers
involved in the selection, design, manufacture, or use of copper alloy bearings.
|
|
Squeeze
Casting & Semi-Solid Forming: 
A 35 page manual created by the NFFS Squeeze Cast & Semi-Solid Forming Division
to promote technical development and expand market opportunities while demonstrating
practical application of squeeze cast & semi-solid technologies in effectively
providing production parts.
|
Alloy Specification
Charts
These popular NFFS reference guides present chemical and mechanical properties for
most common aluminum sand & permanent mold alloys, and brass &bronze alloys,
including no-leads. Copies are available to casting customers directly from the Society,
but complimentary copies are often available from non-ferrous foundries upon request.
Order
Copies
|
